Silver Internal Corner Design Your Own Shelving
The silver 90 degree internal corner design your own shelving unit is the same as a standard internal corner unit but without the upper shelves. This unit can be used with additional corner shelves to create a custom shelf configuration. This unit requires a minimum of 750 mm or 770 mm space in the corner depending on the uprights used (60 mm or 80 mm), we strongly recommend that you allow a further 30mm to allow for uneven walls or corners that are not exactly 90 degrees. As these units are designed to join other wall shelving units they are supplied with one upright and base leg and require two end of run legs to make a standalone unit.
The prices for the internal corner design your own shelving bays 90 degree include the following silver shelving components:
- 1 x upright
- 1 x base leg
- 1 x base shelf
- 1 x ticket edging
- 1 x plinth
- plain back panels
Click above to view our shelving assembly video. To download the assembly instructions please click on the file below.
End of run legs
Important! An end of run leg, which consists of one upright and one base leg, is required to complete the run. Depending on your configuration you may need two uprights and two base legs.